Placa/folha de aço inoxidável ASTM A240 com bom preço(304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA

Informação básica.

Modelo NÃO.	304
Tratamento da superfície	Colorida
Processo	Laminado a quente; laminado a frio
Superfície	Superfície do moinho;2b;Ba;Hl;No.1;No.4;Espelho colorido
Comprimento	2.000/2.438/3.000/6.000 mm
Largura	1000/1219/1500/1800/2000mm
Pacote de Transporte	Pacote de exportação
Especificação	0,4-3mm
Marca comercial	ZYTC
Origem	China
Código HS	7219131900
Capacidade de produção	1000000000 toneladas/ano

Descrição do produto

Nome do Produto	Placa de aço inoxidável ASTM A240 S30408 ​​304 com bom preço
Grossura	0,3 mm-200 mm
Largura	1000mm-2800mm
Comprimento	2.000 mm, 2.438 mm, 3.000 mm, 6.000 mm OU conforme necessidade
Terminar	No.1, 2B, HL, NO.4, BA, SB, 1D, 2D, 2C, 2E, NO.5, NO.9
Técnico	Laminação a quente, laminação a frio
Padrão	ASTM 240, A480, JIS G 4304, EN 10088-2
Quantidade mínima	5 toneladas
Certificação	MTC Tipo 3.1, PMI, CO
Prazo de entrega	7 dias se tiver estoque

Descrição do produto
1. Placa de aço inoxidável ASTM A240 S30408 ​​304 com bom preço (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA
2. espessura: 0,4-200mm3.largura:1000/1219/1500/1800/2000/2500mm4.Comprimento: 2000/2438/3000/6000mm, ou outro comprimento conforme suas necessidades. superfície do moinho; 2B; HL; Nº 4; 8K; Espelho colorido; HL colorido; Superfície de gravação, etc6.Processo: laminado a quente, laminado a frio,7. A qualidade do material temos 201.202,1.4371,1.4373,SUS201,SUS202.301.303.304.304L,304LN,304N,309.309S,310.310S,316L,316Ti,317L,321.321H,347H,1.4319, 1.4305,1.4301,1.4306,1.4833,1.4845 ,1.4404,1.4571,1.4438,1.4541,SUS304,SUS304L,SUS309S,SUS310S,SUS316,SUS316Ti,SUS316L,409,409L,410S,420,430,440C,444,1.4016,1.4006, 1.4002,1.4125,1.4501,1.4362,1.4460,1.4521,1.4545 ,1.4542,1.4568,1.4547,F51,F52,F53,F55,F60,630,631,17-4PH,15-5PH,S31254,S31803,S32900,S32205,S32750,S32550,S32760,S32304,S31 200,S17400,S17700,904L ,254SMo,1.4462,1.4410,1.4501,1.4362,1.4460,1.4545,1.4542,1.4568,1.4547,1.4529,1.4539 e assim por diante.



First of all from the reasons for rusty stainless steel. When the stainless steel surface of the passive film corrosion resistance in the weak part of the formation of pitting due to self-induced reaction, and then the formation of small holes, slowly with chloride ions close to the final formation of a highly corrosive liquid, More speed up the corrosion rate of stainless steel. There is also a reason for the corrosion of cracks between the crystal within the stainless steel, which destroyed the stainless steel surface of the passivation film. Therefore, the surface of stainless steel must always be cleaned and maintained, so as to extend its service life. However, when cleaning the surface of stainless steel should pay attention to: stainless steel surface can not scratch the phenomenon; can not use with bleach ingredients and abrasive cleaning solution, if the use of washing liquid, must be used after the end of clean water rinse.1.When the stainless steel surface is grease, oil pollution, you can use a soft cloth to wipe clean, and then use a neutral detergent or ammonia solution cleaning.2.When the stainless steel surface appears rainbow pattern, because too much use of detergent or oil caused by washing with warm water neutral detergent can be cleaned.3.When the stainless steel surface is dusty or easy to go out of the dirt, you can use soap, weak detergent or ask to rinse. Trademarks on the surface of stainless steel, when washed with warm water or weak detergents, the adhesive ingredients should be rinsed with alcohol or organic solvents.